diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index f10d1aa..eae1c8d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -3,7 +3,7 @@
 
 config SPL_FIRMWARE
 	bool "Enable Firmware driver support in SPL"
-	depends on FIRMWARE
+	depends on FIRMWARE && SPL
 
 config SPL_ARM_PSCI_FW
 	bool
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 149a62f..8ab22ed 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -89,7 +89,7 @@
 
 config SPL_DM_GPIO_LOOKUP_LABEL
 	bool "Enable searching for gpio labelnames"
-	depends on DM_GPIO && SPL_DM && SPL_GPIO
+	depends on SPL_DM_GPIO
 	help
 	  This option enables searching for gpio names in
 	  the defined gpio labels, if the search for the
@@ -490,7 +490,7 @@
 
 config SPL_DM_PCA953X
 	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
-	depends on DM_GPIO
+	depends on SPL_DM_GPIO
 	help
 	  Say yes here to provide access to several register-oriented
 	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 39683fc..323c4fb 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -9,7 +9,7 @@
 
 config SPL_I2C_MUX
 	bool "Support I2C multiplexers on SPL"
-	depends on I2C_MUX
+	depends on SPL && I2C_MUX
 	help
 	  This enables I2C buses to be multiplexed, so that you can select
 	  one of several buses using some sort of control mechanism. The
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 418ed21..ccdd7d7 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -67,7 +67,7 @@
 
 config SPL_LED
 	bool "Enable LED support in SPL"
-	depends on SPL && SPL_DM
+	depends on SPL_DM
 	help
 	  The LED subsystem adds a small amount of overhead to the image.
 	  If this is acceptable and you have a need to use LEDs in SPL,
@@ -85,7 +85,7 @@
 
 config SPL_LED_GPIO
 	bool "LED support for GPIO-connected LEDs in SPL"
-        depends on SPL_LED && DM_GPIO
+        depends on SPL_LED && SPL_DM_GPIO
 	help
 	  This option is an SPL-variant of the LED_GPIO option.
 	  See the help of LED_GPIO for details.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index b44cd98..fd44421 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -123,6 +123,7 @@
 
 config SPL_MMC_IO_VOLTAGE
 	bool "Support IO voltage configuration in SPL"
+	depends on SPL_MMC
 	help
 	  IO voltage configuration allows selecting the voltage level of the IO
 	  lines (not the level of main supply). This is required for UHS
@@ -153,6 +154,7 @@
 
 config SPL_MMC_HS400_ES_SUPPORT
 	bool "enable HS400 Enhanced Strobe support in SPL"
+	depends on SPL_MMC
 	help
 	  The HS400 Enhanced Strobe mode is support by some eMMC. The bus
 	  frequency is up to 200MHz. This mode does not tune the IO.
@@ -166,6 +168,7 @@
 
 config SPL_MMC_HS400_SUPPORT
 	bool "enable HS400 support in SPL"
+	depends on SPL_MMC
 	select SPL_MMC_HS200_SUPPORT
 	help
 	  The HS400 mode is support by some eMMC. The bus frequency is up to
@@ -179,6 +182,7 @@
 
 config SPL_MMC_HS200_SUPPORT
 	bool "enable HS200 support in SPL"
+	depends on SPL_MMC
 	help
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
@@ -478,7 +482,7 @@
 
 config SPL_MMC_SDHCI_ADMA
 	bool "Support SDHCI ADMA2 in SPL"
-	depends on MMC_SDHCI
+	depends on SPL_MMC && MMC_SDHCI
 	select MMC_SDHCI_ADMA_HELPERS
 	help
 	  This enables support for the ADMA (Advanced DMA) defined
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 4129a33..190300f 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -73,6 +73,7 @@
 
 config SPL_GENERATE_ATMEL_PMECC_HEADER
 	bool "Atmel PMECC Header Generation"
+	depends on SPL
 	select ATMEL_NAND_HWECC
 	select ATMEL_NAND_HW_PMECC
 	help
@@ -647,7 +648,7 @@
 
 config SPL_NAND_AM33XX_BCH
 	bool "Enables SPL-NAND driver which supports ELM based"
-	depends on NAND_OMAP_GPMC && !OMAP34XX
+	depends on SPL_NAND_SUPPORT && NAND_OMAP_GPMC && !OMAP34XX
 	default y
         help
 	  Hardware ECC correction. This is useful for platforms which have ELM
@@ -658,6 +659,7 @@
 
 config SPL_NAND_DENALI
 	bool "Support Denali NAND controller for SPL"
+	depends on SPL_NAND_SUPPORT
 	help
 	  This is a small implementation of the Denali NAND controller
 	  for use on SPL.
@@ -673,7 +675,7 @@
 
 config SPL_NAND_SIMPLE
 	bool "Use simple SPL NAND driver"
-	depends on !SPL_NAND_AM33XX_BCH
+	depends on !SPL_NAND_AM33XX_BCH && SPL_NAND_SUPPORT
 	help
 	  Support for NAND boot using simple NAND drivers that
 	  expose the cmd_ctrl() interface.
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index f350c7e..f83876c 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -248,7 +248,7 @@
 
 config SPL_SPI_FLASH_MTD
 	bool "SPI flash MTD support for SPL"
-	depends on SPI_FLASH
+	depends on SPI_FLASH && SPL
 	help
           Enable the MTD support for the SPI flash layer in SPL.
 
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 2c20dc7..0af53a6 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -29,6 +29,7 @@
 
 config SPL_POWER_LEGACY
 	bool "Legacy power support in SPL"
+	depends on SPL && !SPL_DM_PMIC
 	default y if POWER_LEGACY
 	help
 	  Note: This is a legacy option. Use SPL_DM_PMIC instead.
diff --git a/drivers/power/acpi_pmc/Kconfig b/drivers/power/acpi_pmc/Kconfig
index 355d161..629acb0 100644
--- a/drivers/power/acpi_pmc/Kconfig
+++ b/drivers/power/acpi_pmc/Kconfig
@@ -8,6 +8,7 @@
 
 config SPL_ACPI_PMC
 	bool "Power Manager (x86 PMC) support in SPL"
+	depends on SPL
 	default y if ACPI_PMC
 	help
 	  Enable support for an x86-style power-management controller which
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index d6cea8e..c519e06 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -55,7 +55,7 @@
 
 config SPL_DM_REGULATOR_BD71837
 	bool "Enable Driver Model for ROHM BD71837/BD71847 regulators in SPL"
-	depends on DM_REGULATOR_BD71837
+	depends on DM_REGULATOR_BD71837 && SPL
 	help
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM BD71837 and BD71847 in SPL.
@@ -70,7 +70,7 @@
 
 config SPL_DM_REGULATOR_PCA9450
 	bool "Enable Driver Model for NXP PCA9450 regulators in SPL"
-	depends on DM_REGULATOR_PCA9450
+	depends on DM_REGULATOR_PCA9450 && SPL
 	help
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM PCA9450 in SPL.
@@ -115,7 +115,7 @@
 
 config SPL_REGULATOR_PWM
 	bool "Enable Driver for PWM regulators in SPL"
-	depends on REGULATOR_PWM
+	depends on REGULATOR_PWM && SPL
 	help
 	  This config enables implementation of driver-model regulator uclass
 	  features for PWM regulators in SPL.
@@ -163,7 +163,7 @@
 
 config SPL_DM_REGULATOR_FIXED
 	bool "Enable Driver Model for REGULATOR Fixed value in SPL"
-	depends on DM_REGULATOR_FIXED
+	depends on DM_REGULATOR_FIXED && SPL
 	select SPL_DM_REGULATOR_COMMON
 	---help---
 	This config enables implementation of driver-model regulator uclass
@@ -345,7 +345,7 @@
 
 config SPL_DM_REGULATOR_PALMAS
 	bool "Enable driver for PALMAS PMIC regulators"
-       depends on SPL_PMIC_PALMAS
+	depends on SPL_PMIC_PALMAS
 	help
 	This enables implementation of driver-model regulator uclass
 	features for REGULATOR PALMAS and the family of PALMAS PMICs.
@@ -353,7 +353,7 @@
 
 config SPL_DM_REGULATOR_LP87565
 	bool "Enable driver for LP87565 PMIC regulators"
-       depends on SPL_PMIC_LP87565
+	depends on SPL_PMIC_LP87565
 	help
 	This enables implementation of driver-model regulator uclass
 	features for REGULATOR LP87565 and the family of LP87565 PMICs.